How To Change A Mountain Bike Chain

To change a mountain bike chain, you’ll need a chain tool—a device that removes and installs chain links. You’ll also need a clean, dry rag and some lubricant. Begin by shifting your bike into the smallest cog at the back, and the middle chainring at the front.

Then, use the chain tool to push the pin out of the link that you want to remove. Next, remove the link and pull the chain through the derailleur. To install the new chain, feed it through the derailleur and then use the chain tool to push the pin back into the link.

Finally, lube the chain and wipe off any excess with the rag.

  • Park your mountain bike on a level surface and place it in a bike stand
  • Shift your mountain bike into the smallest gear
  • Find the master link on your chain
  • The master link is the link that allows you to take the chain off without the use of tools
  • Push the master link pin out with your fingers or a small screwdriver
  • Remove the old chain from your mountain bike
  • Wrap the new chain around your mountain bike sprockets, starting with the smallest gear
  • Find the master link on the new chain
  • Insert the master link pin back into the master link
  • Test the new chain by pedaling your mountain bike forward

Remove bike chain without tool

If you’re in a pinch and don’t have a chain tool handy, there’s still a way to remove your bike chain. All you need is a pair of pliers. First, locate the master link on your chain.

This is the link that allows you to take the chain on and off without the use of a tool. It will have a slightly different appearance than the other links, and may be marked with an “ML” or “master link” logo. If your chain doesn’t have a master link, you’ll need to use a chain tool to remove a link.

Once you’ve found the master link, use your pliers to gently push the pins out of the link. Be careful not to lose the small springs that sit on top of the pins. Once the pins are removed, the link will come apart.

You can now slide the chain off of your bike. To put the chain back on, simply reverse the process. Line up the link, and use your pliers to push the pins back into place.

Make sure the small springs are in place, and that the link is fully seated before you ride.

How do you replace a chain on a mountain bike?

If your mountain bike chain is starting to feel sluggish, it might be time for a replacement. Here’s a step-by-step guide on how to replace a chain on a mountain bike. 1. Remove the old chain.

Use a chain breaker tool to remove the old chain from the bike. 2. Clean the chainrings. Use a brush or rag to remove any dirt or debris from the chainrings.

3. Install the new chain. Use the chain breaker tool to install the new chain onto the bike. 4. Adjust the chain.

Use a chain tensioner tool to adjust the tension of the new chain. 5. Test ride the bike. Go for a test ride to make sure the new chain is working properly.

Can you replace a bike chain yourself?

If your bike chain is starting to feel loose or sounds like it’s grinding, it’s probably time for a new one. Luckily, replacing a bike chain is a relatively easy process that you can do at home with just a few tools. Here’s what you’ll need:

– A chain break tool – A new bike chain – A pair of needle nose pliers

– A rag First, use your chain break tool to remove the old chain. You’ll need to align the tool with one of the chain’s rivets, and then squeeze the handle to push the pin out of the rivet.

Repeat this process until the chain is removed. Next, clean the chainring and cogs with a rag to remove any dirt or debris. Then, thread the new chain through the chainring and cogs, and connect the ends using the rivets.

Finally, use your needle nose pliers to bend the end of one of the rivets over the other, securing the chain in place. Trim off any excess rivet with your chain break tool, and you’re ready to ride!

Can you replace a bike chain without a tool?

You can replace a bike chain without a tool, but it will be more difficult than if you had a tool. You will need to remove the old chain, and then thread the new chain through the derailleurs and around the sprockets. This can be tricky, and if you don’t have a tool, you may not be able to get the chain tight enough.

If the chain is too loose, it will fall off the sprockets and you will have to start over. It is always best to use a tool when replacing a bike chain.

How do I reinstall my mountain bike chain?

If your bike chain is starting to feel loose or sluggish, it might be time for a new one. But before you go out and buy a new chain, you first need to remove the old one. Here’s a step-by-step guide on how to do just that:

1. Start by shifting your bike into the smallest gear. This will give you more slack to work with when removing the chain. 2. Next, use a chain breaker tool to remove one of the side plates from the chain.

3. With the side plate removed, you should be able to pull the chain off the bike. 4. Once the old chain is off, it’s time to install the new one. Start by feeding the chain through the front derailleur.

5. Next, route the chain around the cassette and through the rear derailleur. 6. Finally, connect the two ends of the chain using a quick link or master link. 7. Once the new chain is installed, shift through all the gears to make sure everything is running smoothly.

How To Replace A Mountain Bike Chain | Change Your Chain Like A Pro

Conclusion

If you ride a mountain bike, sooner or later you will need to replace your chain. Here is a step-by-step guide on how to do it. First, you will need to remove the old chain.

To do this, use a chain tool to push out one of the pins that hold the chain together. Then, feed the chain through the derailleur and remove it from the bike. Next, you will need to clean the chainring teeth and the cassette cogs.

A dirty chain can cause skipping and poor shifting. To clean the chainring teeth, use a brush and some degreaser. For the cassette cogs, you can use a rag and some degreaser.

Once the chainring and cassette are clean, you can install the new chain. Start by feeding the chain through the derailleur and then connect it to the chainring. Use the chain tool to push in a new pin, and then connect the other end of the chain.

Finally, test the new chain by shifting through all the gears. If the chain is too long, you will need to remove one or two links. If the chain is too short, you will need to add one or two links.