How To Change Bike Chain Without Tool
Contents
If you’re like most people, you probably don’t know how to change a bike chain without using any tools. It’s actually not that difficult, and with a little practice, you’ll be able to do it in no time. Here’s how:
First, you’ll need to remove the old chain. To do this, you’ll need to use a chain tool to push the pins out of the links. Once the pins are out, you can simply pull the chain apart.
Next, you’ll need to measure the new chain. The best way to do this is tolay it out on the ground next to the old chain. You’ll want to make sure that the new chain is the same length as the old one.
Once you have the new chain, you’ll need to put it on the bike. Start by threading it through the rear derailleur. Then, run it through the front derailleur and finally, connect it to the chainrings.
You’ll need to use the chain tool to push the pins back into the links. That’s it! You’ve now successfully changed your bike chain without using any tools.
- Flip your bike over and prop it up on the handlebars and seat
- Find the master link on your chain
- This is the link that can be opened and closed without the need for tools
- Open the master link and remove the old chain
- Cut the new chain to the correct length
- Attach the new chain to the bike using the master link
- Flip the bike back over and enjoy your new chain!
How to find master link on bike chain
If you’re looking to find the master link on your bike chain, there are a few things you’ll need to do. First, you’ll need to identify the type of chain you have. There are two common types of chains- those with master links and those without.
If your chain does not have a master link, then the entire chain is one big loop and finding the master link is not necessary. If your chain does have a master link, it will be located at one end of the chain. The first step in finding the master link is to identify which end of the chain the master link is on.
This can be done by looking at the links themselves. Master links will usually be a different size or shape than the other links on the chain. Once you’ve identified which end of the chain the master link is on, the next step is to remove the chain from the bike.
This can be done by removing the rear wheel and then loosening the chain from the derailleur. Once the chain is loose, you can remove it completely from the bike. With the chain removed from the bike, you can now take a closer look at the links.
The master link will be attached to two other links on the chain. One of these links will have an open end, while the other will have a closed end. The open-ended link is the one that you will need to remove in order to take the chain off.
How do I change my bike chain without a tool
Assuming you don’t have a chain tool with you and need to change your chain on the go, there are a few ways you can do this without one. If you have a quick link, this is the easiest way to do it. Quick links are specially designed to be removed and replaced without a chain tool, and most modern chains will have them.
To remove a quick link, simply unscrew it with your fingers or a pair of pliers. Once it’s unscrewed, the link will come apart and you can remove the chain. To put it back on, line the link up and screw it back together.
Make sure it’s tight so it doesn’t come apart while you’re riding. If your chain doesn’t have a quick link, you can remove it with a pair of needle nose pliers. First, find a link that you can easily push a pin out of.
Unscrew the master link (the one that holds the other end of the chain together) and push the pin out with the pliers. Once the pin is out, the link will come apart and you can remove the chain. To put it back on, line the link up and push the pin back in.
You may need to use the pliers to help get it started. Make sure the pin is fully seated so the chain doesn’t come apart while you’re riding.
What is the best way to change my bike chain without a tool
If you don’t have a chain tool handy, there are still a few ways you can remove and replace your bike chain. One method is to use a pair of pliers to gently twist the master link open. Once the master link is removed, you can slide the chain off the bike.
To put a new chain on, simply feed it through the derailleur and around the sprockets, and then reattach the master link. Another way to remove and replace your bike chain is to use a couple of paper clips. First, straighten out the paper clips and then use them to push out the pins that hold the links together.
Once the pins are removed, you can slide the chain off the bike. To put a new chain on, feed it through the derailleur and around the sprockets, and then use the paper clips to push the pins back in. Whichever method you use, be sure to lubricate your chain before you ride to ensure smooth, quiet operation.
How can I change my bike chain without a tool
If you don’t have a chain tool handy, you can still remove and replace your bike chain with a little elbow grease. Here’s how: 1. Use a chain whip to loosen the chain from the cassette.
2. Unhook the chain from the derailleur. 3. Take the chain off the bike. 4. Feed the new chain through the derailleur and around the sprockets.
5. Join the ends of the chain using a chain connector. 6. Use the chain whip to tighten the chain onto the cassette. 7. Test the chain by pedaling the bike to make sure it’s shifting smoothly.
How to REMOVE A BIKE CHAIN without special tools (don’t do this to your triathlon bike)\Change Bike Chain Without Tool
Conclusion
If you don’t have a chain tool handy, you can still remove and replace your bike chain with a few common tools. First, you’ll need a chain whip and a pedal wrench or a 15mm wrench. To remove the chain, place the chain whip on the chain at the point where it meets the cog.
Apply pressure to the handle of the chain whip in the direction of the cog to loosen the chain. Then use the pedal wrench or 15mm wrench to remove the axle nut or quick release skewer. Slide the wheel off of the frame, taking care not to lose the spacers.
The chain should now be loose enough to remove by hand. To install the new chain, feed it through the derailleur and around the cog, making sure that the chain is sitting in the teeth correctly. Use the chain whip to hold the chain in place and use the pedal wrench or 15mm wrench to tighten the axle nut or quick release skewer.
Replace the wheel and make sure that the chain is not too tight or too loose.