How To Install Mountain Bike Pedals

If you’re new to mountain biking, or just new to bike pedals in general, the process of installing them can seem a bit daunting. But don’t worry, we’ll walk you through it step by step so you can get out on the trails and enjoy your ride. The first thing you’ll need to do is remove the old pedals from your bike.

If you’re not sure how to do this, consult your bike’s manual or ask a knowledgeable friend. Once the old pedals are off, it’s time to install the new ones. If you’re installing pedals with clips, start by attaching the pedal to the crank arm.

Make sure the pedal is oriented correctly so the clips will engage properly when you start pedaling. Once the pedal is in place, tighten the retaining bolt until it’s snug. If you’re installing platform pedals, the process is a bit different.

Start by attaching one pedal to the crank arm, then thread the axle of the other pedal through the frame and attach it to the first pedal. Again, make sure the pedals are oriented correctly so you don’t have any problems when you start riding. Once both pedals are in place, tighten the retaining bolts until they’re snug.

That’s all there is to it! With your new pedals installed, you’re ready to hit the trails and enjoy your ride.

  • Place the bike in a stand so that the pedals are facing up
  • Unscrew the old pedals from the bike using a pedal wrench
  • Grease the threads on the new pedals with bike grease
  • Screw the new pedals into the bike until they are tight
  • Ride the bike to test the new pedals

How to install bike pedals without pedal wrench

If you’re a bike enthusiast, you know that one of the most important parts of the bike are the pedals. Without pedals, you can’t ride! But, if you don’t have a pedal wrench, don’t worry, you can still install your pedals without one.

Here’s how: 1. First, you’ll need to remove the old pedals from your bike. To do this, use a wrench to loosen the bolts that hold the pedals in place.

Once the bolts are loose, the pedals should come right off. 2. Next, take a look at the new pedals you’ll be installing. There are usually two different sides to the pedal – one side is for the left side of the bike, and the other side is for the right side.

Make sure you know which side is which before you continue. 3. Now, it’s time to install the new pedals. Start by threading the pedals onto the crank arms.

Make sure the pedals are tight before moving on. 4. Once the pedals are in place, use a wrench to tighten the bolts that hold the pedals in place. Make sure the bolts are tight, but don’t over-tighten them.

5. That’s it! You’ve successfully installed new pedals on your bike without needing a pedal wrench.

Which way do mountain bike pedals go on?

There are a few schools of thought when it comes to which way mountain bike pedals go on. Some people say that the pedals should be facing the same direction as the front wheel, while others say that the pedals should be facing the opposite direction. There is no right or wrong answer, it simply comes down to personal preference.

Some people find that having the pedals facing the same direction as the front wheel helps them to keep their balance and pedal more efficiently, while others find it more comfortable to have the pedals facing the opposite direction. Ultimately, it is up to the individual rider to decide which way they want their pedals to face.

Do all pedals fit all mountain bikes?

The simple answer is no, all pedals do not fit all mountain bikes. There are a few different types of mountain bike pedals available on the market, each with their own specific designs that make them incompatible with certain types of mountain bikes. The most common type of mountain bike pedal is the clipless pedal, which requires the use of a special cleat that attaches to the bottom of the rider’s shoe.

These cleats are not compatible with all mountain bike shoes, so it’s important to check compatibility before purchasing a set of clipless pedals. Another type of mountain bike pedal is the platform pedal, which does not require the use of a cleat. These pedals are generally more compatible with mountain bike shoes, but there are still some compatibility issues to be aware of.

It’s always best to consult with a bike mechanic or the manufacturer of your mountain bike before purchasing new pedals.

How do you put a bike pedal back on?

Assuming you are referring to a pedal that has come detached from the crank arm, you will first need to remove the crank arm. This is done by undoing the retaining bolt at the end of the crank arm using an appropriate wrench or Allen key. With the crank arm removed, you will be able to see the splines on the end of the axle.

Next, take the pedal and line up the splines on the axle with those on the pedal. You may need to use a little force to get the pedal to engage with the splines. Once the pedal is engaged, you can reattach the crank arm by lining up the holes and threading in the retaining bolt.

Again, you will need an appropriate wrench or Allen key to tighten this bolt.

Are mountain bike pedals reverse thread?

Mountain bike pedals are not reverse thread. The reason for this is because when you are riding uphill, you want the pedals to rotate in the same direction as your wheels. If the pedals were reverse thread, they would rotate in the opposite direction, making it difficult to pedal uphill.

How to Remove and Install New Bike Pedals in 5min or Less | MTB Pedals


If you’re planning on doing any mountain biking, you’ll need to know how to install mountain bike pedals. It’s not a difficult process, but there are a few things you need to know before you get started. First, you need to decide what type of mountain bike pedals you want.

There are two main types: clipless and platform. Clipless pedals are the most popular choice among mountain bikers, as they offer a more secure connection between your shoe and the pedal. Platform pedals are a good choice for beginners, as they’re easier to use and don’t require special shoes.

Once you’ve chosen your pedals, you’ll need to attach them to your bike. If you’re using clipless pedals, you’ll need to screw them into the crank arms. With platform pedals, you can just bolt them on.

Once your pedals are installed, you’re ready to hit the trails!