How To Use Gears On A Bicycle

Bicycles are a great way to get around, whether riding to work, to the store, or just out for a leisurely ride. But if you’ve never ridden a bike before, it can be a little bit daunting – especially if you don’t know how to use the gears. Gears are an important part of riding a bike; they can make a big difference in how easy (or difficult) it is to pedal. 

In this post, we’ll go over how to use gears on a bicycle so that you can get the most out of your ride.

  • Most bikes will have gears on the pedals, on the handlebars, or both.
  • If your bike has gears on the pedals, you will need to shift them with your foot.
  • Place your foot on the pedal and push down.
  • If your bike has gears on the handlebars, you will need to shift them with your hand.
  • Place your hand on the lever and push it up or down.
  • Experiment with shifting gears until you find the right gear for the situation.
  • You will want to shift to a lower gear when going up hills and to a higher gear when going down hills or pedaling faster.

use gears

How To Use Gears on A Mountain Bike

When pedaling up a hill, it’s important to shift into a lower gear to maintain a good cadence (pedaling speed). If you try to pedal in a higher gear, you’ll likely go too slowly and start to feel the burn in your legs.

Conversely, you’ll want to shift into higher gear when pedaling downhill. This will help you maintain control of your bike and avoid pedaling too slowly and losing momentum. Keeping your pedaling cadence around 80-90 RPM is good. This is a good starting point, but you may need to adjust your gear based on the terrain and how you feel. 

If you need help deciding what gear to be in, start in a lower gear and shift up until you find a comfortable pedaling cadence. Then, if you need to, you can always shift back down into a lower gear. Remember, there’s no shame in using gears – they’re there to help you! 

So, feel free to experiment until you find what works best.

How Do You Use Gears on A Bike for Beginners?

First, let’s talk about gears and why they’re important. Gears are cogs that help your bike move forward. They work by meshing together and turning the bike’s chain, which rotates its wheels. 

The number of gears on a bike depends on the type of bike you have. For example, most road bikes have 18 gears, while mountain bikes typically have 27 gears. The gears are located on the bike’s cassette, the cluster of cogs on the rear wheel, and the bike’s crank, to which the two-armed component of the pedals are attached to. To change gears, you’ll use the bike’s shifters, which are located on the handlebars.

Now that we’ve covered the basics let’s discuss how to use the gears. When you’re pedaling, you’ll want to be in a gear that is comfortable for you. 

If you’re pedaling too slowly, you’ll be in low gear. If you’re pedaling too quickly, you’ll be in high gear. You’ll want to find a happy medium where you’re pedaling at a good pace and not straining yourself.

What Are The 7 Gears on A Bike for?

There are seven gears on a bike for different purposes. The first gear is for starting, and the second is for going up hills. The third gear is for going faster on level ground, and the fourth gear is for going down hills. 

The fifth gear goes even faster on level ground, and the sixth gear goes even faster down hills. The seventh gear is for racing.

Which Gear Should I Use on My Cycle?

There are two main gear systems for bicycles – derailleur gears and hub gears. 

Derailleur gears are the most common, and most bikes will have between 18 and 27 gears. Hub gears are found on some older and city bikes and usually have between 3 and 8 gears. The number of gears you need will depend on a few factors – the riding you’ll be doing, the terrain you’ll be riding on, and your fitness level. 

You’ll need more gears if you are doing many hills. If you’re fit, you’ll be able to get by with fewer gears. To shift gears, most bikes have shifters on the handlebars. 

Some higher-end bikes may have electronic shifting, which can be more precise and easier to use. When choosing gears, it’s also important to consider the gear ratio. This is the ratio between the front and rear sprockets. 

A bike with a low gear ratio will be easier to pedal up hills but slower on flat or downhill sections. A bike with a high gear ratio will be the opposite – harder to pedal up hills but faster on flat or downhill sections. So, which gear should you use on your bike?

Is Gear 1 High or Low on A Bike?

Most bicycles have multiple gears, and each gear has a specific purpose. Gear 1 is the lowest gear on a bike and is used for pedaling uphill or starting from a stop. Gear 2 is higher and is used for pedaling on level ground or downhill. 

Gear 3 is the highest gear on a bike and is used for pedaling downhill or riding at high speeds.

How To Use Road Bicycle Gears

History Of Beach Cruiser Bike

Colnago Bike


Gears are essential for making biking easier and more efficient, and they can be tricky to use at first. When you’re pedaling, the gears on your bike help to make the pedaling easier or harder, depending on which gear you’re in. The smaller the gear, the easier it is to pedal. The larger the gear, the harder it is to pedal.